Pe Blown Film Machine

 

The most important factors in the work of pe blown film machine are three factors

One temperature (machine temperature, room temperature)

Double helix

 

Three cooling system

The energy saving of the film blowing machine can be divided into two parts: one is the power part and the other is the heating part.

Energy saving in the power part: Most of them use frequency converters. The energy saving method is to save the remaining energy consumption of the motor. For example, the actual power of the motor is 50Hz, but you actually only need 30Hz in production. Wasted, the frequency converter is to change the power output of the motor to achieve the effect of energy saving.

 

Energy saving in the heating part: Most of the energy saving in the heating part is the use of electromagnetic heaters to save energy, and the energy saving rate is about 30%-70% of the old-fashioned resistance coil.

1. Compared with resistance heating, the electromagnetic heater has an extra layer of insulation layer, which increases the utilization rate of heat energy.

2. Compared with resistance heating, the electromagnetic heater directly acts on the material tube to heat, which reduces the heat loss of heat transfer.

3. Compared with resistance heating, the heating speed of electromagnetic heater is more than a quarter faster, which reduces the heating time.

4. Compared with resistance heating, the heating speed of the electromagnetic heater is faster, and the production efficiency is improved, so that the motor is in a saturated state, which reduces the power loss caused by high power and low demand.

The above four points are the reason why Feiru electromagnetic heater can save energy up to 30%-70% on the film blowing machine.

 

Model	600	800
Name	Double Die HDPE /LDPE Polyethylene Plastic Film Blowing Machine
Screw Diameter	65mm	75mm
Screw Ratio	28:1	28:1
Screw Speed	10-100r/min	10-100r/min
Max.Output	50kg/h	90Kg/h
Max.Folding Width of Film	550mmx2	800mmx2
Single-sided Thickness of Film	0.01-0.10mm	0.01-0.10mm
Power of Main Motor	22Kw	37Kw
Total Power	40Kw	70Kw
Weight of Machine	3000kg	4500kg
Overall Dimensions	5000x2900x3800	5600x3400x4700

 

 

Q:Where are you?Can we go to China and visit your factory?
A:Yes,of course.We are in wenzhou,China.Welcome to our factory.

Q:Do you have manual with the machine?
A:Yes,of course.It is in English version.

Q:Can you offer us the necessary paper to do the customs clearance?
A:Yes,of course.We will send you the commercial invoice,sales contract,packing list,bill of lading(FOB or CFR,CIF terms),insurance policy(if CIF terms),also CO if you need.

 

Hot Tags: pe blown film machine, China pe blown film machine manufacturers, suppliers, factory